Hello Ken, Here's some pictures of two projects
for the club website. The first is a
vacuum engine, designed by Philip Duclos. I used the plans out
of the steam &
stirling book. The other is a Pioneer I just completed on 4/05/06.
This is a 2
cycle, non-compression, 1.125" bore, 4.25" flywheel,
designed by Rudy Kouhoupt.
This was my first I.C. engine and was a lot of fun to build.
After a frustrating 2
hour break in, it's now running very well. Thanks Vic
vacuum engine _______________ Pioneer
vacuum enginedesigned by Philip Duclose
Pioneer by Rudy Kouhoupt.